FHV-RE

Up-Blast Centrifugal Utility Set

  • Air Volume: 100 - 8,000
  • Maximum SP: 5" wg. @ standard air density

FEATURES & BENEFITS

  • Ideal for high temperature, heavy grease applications
  • Curb mounted design for easier installation
  • Ventilated motor housing for motor, shaft and drive protection
  • Adjustable motor plate assembly
  • Tilt out wheel – easy access during maintenance, automatic safety lock with manual release
  • Interlocked disconnect switch
  • Non-overloading, welded aluminum backward inclined wheel is statically and dynamically balanced and permits usage on high static pressure applications
  • Heavy duty bearings in excess of 200,000 hours of operation
  • Motor base and shaft seals provide a double layer of protection to eliminate water leaks into the building and grease build-up on motor
  • 2" grease drain fully welded onto discharge elbow
  • Lock and retaining pin - keep wheel centered over the inlet
  • Optional Rain Cap Assembly

ADDITIONAL IMAGES

CERTIFICATIONS

FloAire certifies that Models FHV-RE11 through FHV-RE24 shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and Publication 311, and comply with the requirements of the AMCA Certified Rating Program.

Models FHV-RE11 through FHV-RE24 have been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models FHV-RE11 through FHV-RE24 are ETL Listed under file numbers 103336443COL-001 and 102628244PRT-001 and comply with UL705 (electrical), UL762, and ULC-S645 Standards and CSA Std C22.2, No 113.

 
 
Catalog #112F
July 2019